Product Description |
Details |
Wattage |
150 Watt |
Average life |
50000 Hours |
Housing |
Pressure die-cast aluminium alloy ADC12 for housing (heat sink) for effective thermal management, sturdiness & excellent corrosion resistant. Cable gland is used for maintaining ingress protection. |
Finish |
Pure Polyester powder coated grey after phosphochromate treatment. |
Light Source |
High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W. |
Optics |
PC lens to ensure better uniformity of light distribution. (For detailed Photometric data, Please refer LM79 report & IES file) |
Cover |
Tempered protective toughened glass, thermal shock and impact resistant (IK-07) fixed to the housing with SS screws. |
Electronic Driver |
Built-in potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 & CISPR 15. |
Mounting |
Suitable for pole mounting with bracket arm OD of 60 mm (max). Recommended mounting height with suitable in-ground reinforcement is 9-10 m. |
IP Rating |
IP66 |
IK Rating |
IK07 |
Nominal Voltage (V) |
240 V |
Mains Current (A) |
0.660 |
Power Factor |
0.95 |
THD |
≤10 |
Colour Temp. (CCT) |
5700 K |
CRI (Ra) |
≥70 |
System Lumens (lm) |
17500 Lumens |
Colour of Fixture |
Grey |
Length (l) |
595 mm |
Width (w) |
291 mm |
Height (H) |
85 mm |
Mounting Bracket Dia (Ø) |
63 mm |